Blog - Overview

Blog - Overview

Tuesday, April 7, 2015

Boss CE-2 Chorus

General

The Pork Barrel is a project from Madbeanpedals and based on the Boss Chorus CE2.
Since the CE2 is a rare pedal in the meantime, its a good possibility to do it yourself :)

Schematic


My Build 

The Pork Barrel can be built into a 1590B box, eventhough its a thight fit.
I built the Chorus with a MN3207 BBD and a MN3102 Clock chip.
I also used the Rate LED also for bypass. So the Rate LED turns on / off with the bypass switch.

This is a great sounding pedal and i encourage everyone to build it :)

 

4 comments:

  1. How did you mod LED2 to turn on/off with the bypass?

    ReplyDelete
  2. How did you mod LED2 to turn on/off with the bypass?

    ReplyDelete
  3. instead connecting the cathode of LED2 to the PCB, connect it to the 3PDT switch, to the pin, where the cathode of the bypass LED would be connected.
    this should work, take a look at the schematic

    ReplyDelete
  4. This comment has been removed by a blog administrator.

    ReplyDelete